The popular homemade ingredient capable of leaving tile joints flawless – Enséñame de Ciencia

Get rid of these complications in a simple and effective way.

When cleaning tile floors or walls, one of the most complex problems is the whitewashing of their joints, which, as our readers know, correspond to the separation remaining between one tile and another, and given their distinctive shape, an area that tends to get dirty very easily.

Although these elements are essential to construction, since they provide a technical and aesthetic function in design, over time, most people find it difficult not to know how to restore them and return them to their original color (often white); However, you don’t have to keep a slick finish, as there are very effective home tricks that will allow you to leave these areas truly flawless.

So that you no longer suffer in this situation, in this article we are going to share one of the most effective tricks to achieve it, and best of all, you only need homemade ingredients that we all have at home, so we invite you to continue reading. To find out how you can do this.

The popular homemade ingredient capable of leaving flawless tile joints

Our main ingredient that leaves the tile joints in your home truly flawless is baking soda, which, as many may know, has the distinction of being a powerful bleach; To implement it in this trick, all you have to do is:

• Gently remove all adhering dust and dirt. The first thing you should do to restore tile joints is to remove all possible slightly adhering dust and dirt, this is done so that the whitening treatment will work directly on the damaged area (the joints). So, in the case of the floor, mop or vacuum as usual, while in the case of the walls, try dusting with a feather duster or similar.
• Prepare the bleaching solution. To whiten tile joints, it is necessary to make a bleaching solution, for which you will need half a cup of hot water, half a cup of white vinegar, one teaspoon of liquid dish soap and half a cup of baking soda. In case the final mixture is too liquid, add a little baking soda, our main ingredient. If you find you need more bleach solution, just increase the amounts.
• let it soak. Once your bleach solution is ready, take a spatula or brush and add it to all of your tile joints and let it sit for about 30 minutes.
• rubbing time. When the time has passed, all that remains is to start rubbing with the help of a toothbrush on each joint, you will notice how all the dirt immediately begins to come off.
• Rinse and dry. If you have already noticed that all the dirt has come off, then it’s time to rinse and dry. Both operations can be done with a damp cloth and a dry one, respectively. Finally, if you prefer, you can wipe or clean the walls as usual.